Menu
Kidde Technologies Fire Suppression System Parts and Service
  • Home
  • Service
  • PARTS
    • Bottle Rebuild Program
    • Parts Room
  • Training
  • Warranty
  • Technical Support
  • Contact
  • Home
  • Service
  • PARTS
    • Bottle Rebuild Program
    • Parts Room
  • Training
  • Warranty
  • Technical Support
  • Contact
Picture
Armored Linear Thermal Detector

The Armoured Linear Thermal Detector (Armoured LTD) is a twin conductor cable with a heat-sensitive covering protected by an armoured metallic outer sheath. In a fire or overheat condition, the heat sensitive covering inside the armour melts, causing the conductors to short, which alarms the system.
Request Information
Benefits & Features
  • Encased in a stainless steel flexible loom
  • Less maintenance than non-armored LTD
  • Easier installation than non-armored LTD
  • Requires replacement after activation
  • Available in a variety of lengths
  • Multiple detectors can be connected in series
  • Detector routed within hazard area

Specifications
Alarm temperature-                             464°F/240°C
Operating temperature-                       392° F/200°C
Connector operating temperature-      257° F/125°C
Minimum bend radius-                         3 in./75 mm
Nominal current draw-                         0mA


Note: If the wire alarms to a fire, the wire must be replaced prior to returning the system to service.
Home
Parts
Service
Training
Warranty
Technical Support
Contact Us
Thermal Protection Services is the only authorized distributor of Kidde Technologies Commercial Ground Vehicles genuine parts, field service, technical and warranty support, and customer training.